Use this thread to post patterns related to Symbols
Use this thread to post patterns related to Symbols
Robb...anyway you can add screen shots or jpg of the patterns for everyone to see before they open?
Here are some snapshots to go with Roberts patterns
I like this format, but it is more difficult for the pattern author to do this becuase it will automaitcaly open their own patterns in Pattern editor. I like the snapshot of the imprt dialog becuase it give the dimensions (height, width, depth) that the author intended for the pattern.
Doug Fletcher
Yes, I will do in the future... DB got my back on this one. Sorry...
_________________________________
All the best!
Robert
Visit my company and/or church web page:
My Company Site My Company Blog My Church Blog My Church Website My Patterns
Is there any way to subscribe to a thread without posting to it?
(Looks like I subscribed to this thread, and asked a valid question at the same time).
Livin' Life
Lovin' My Carvewright
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29
I developed this slightly 3D MPC of the US Navy SEAL device to honor a retired Senior Chief SEAL who works with me. I hope this may serve others who want to honor another warrior. Please feel free to modify, improve and share the design as my skills are still limited.
Here's a carved view
If you wish to work on this I'll share the PTN or artwork for your use.
Last edited by Capt Bruce; 02-06-2011 at 05:18 PM.
Fair winds,
Capt Bruce
Kinney deSigns http://kinneydesigns.us
CarveWright START U Team Member.
30 year USN SEABEE, the original Weapons of Mass Construction.
Designer Ver 1.187 and 2.007, Ver.3.001 One 2009 B CW w ROCK and a 5th Year Anniversary C CW
Rotary Jig, 2D and 3D, Tracing Probe, DFX and STL Importers
.
Capt Bruce once again very nice work on the pattern and the carving/finish.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Thank you Eddie,
I keep learning and trying to give something back for all those who have helped me.
Fair winds,
Capt Bruce
Kinney deSigns http://kinneydesigns.us
CarveWright START U Team Member.
30 year USN SEABEE, the original Weapons of Mass Construction.
Designer Ver 1.187 and 2.007, Ver.3.001 One 2009 B CW w ROCK and a 5th Year Anniversary C CW
Rotary Jig, 2D and 3D, Tracing Probe, DFX and STL Importers
.
This could belong in a few places. found it interesting so I make a pattern from it.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie