Originally Posted by
cnsranch
I've had the probe stop short on two different scans. First time I thought it was Operator Error (usually is with me), and forgot about it.
This time, 12 hour scan, I spent 30 minutes getting it right - I've even got a 1/2" grid throughout the sled. Darned thing "finished" about 3/4" from where it was supposed to, leaving about 1/2" of the scan short.
Any ideas? No real way to test if you've got your scan area entered right, so you're screwed if this happens.
This time, I'm convinced it wasn't Operator related.
BTW, pretty big scan, 2.86 Meg finished. But, the machine let the scan go after checking available area on the card, etc. (Card now shows 3.822 Megs available, with the scan on it, and a few small projects).