That's what I'm wondering. The CW 1/16" straight bit has less than 0.5" cutting flute length, before the diameter increases, so I'm thinking it's got to be something other than that particular bit that was used.
That's what I'm wondering. The CW 1/16" straight bit has less than 0.5" cutting flute length, before the diameter increases, so I'm thinking it's got to be something other than that particular bit that was used.
Michael T
Happy Carving!
╔═══ Links to Patterns & Resources for CompuCarve™ & CarveWright™ ═══╗