-
Cut Motor
From the time i insert card and turn on machine the cut motor keeps intermittently trying to start (like just 1 second pulse not fully starting ). It does this all the way through setup until i start project. It does not do it when bit is touching off or as it find board thickness or surface but it is doing it right before and after. Also it carves the projects just fine but when project is done and it shows time it took. Motor continues to cut on and off till i turn it off. Was reading a couple of post about the triad and pulses getting through to the x termination board was also told maybe main board. Has anyone had experience like this or any ideas? THANKS
Ver 1.179
HP-Nvidia HD Video Card
Windows 7 Ultimate
Scanning with Carvewight Probe and Next Engine 3d Laser Scanner HD
If you have any scanning needs let us know.Check Out Our Patterns in the depot under eromran
If you allow it to happen, you can let today erase all of yesterday or if you choose,you can let yesterday erase the rest of your life.
Ed
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules