There is another thread on this but I wanted to bring it to a place where it might be looked at.... It is also posted in RED as I thought it was VERY IMPORTANT.

The Problem.... If you use a After Market Chuck and you get this error during Bit Checks with the 1/8 inch Cutting Bit.... YOUR CUTTING BIT IS TOO LONG...... That's IT.....

George "Mannwranglers" called me tonight and had posted in the other thread and His Bit length was 1.51 inches from the back of the Locking Ring where it would bump up against the ROCK Chuck and to the end of the cutting tip.

MY bit was 1.41 inches from back of lock ring to Cutting Tip....

He changed it while we were on the Phone and guess WHAT... It WORKED.....

The machine has been OPTIMIZED for the Bit Length of the CARVTITE......

I am doing LHR a BIG PUBLIC SERVICE ANNOUNCEMENT HERE AND SAVING THEM A FEW PHONE CALLS A DAY POSTING THIS.....

They tightened up the window of Bit Length.... I bet they never expected it to cause the Phone to Ring off the Hook.... Your Welcome...

AL Who.