You know your a carvewright owner if.....

[fwharris]

..You finally learned how to "search" so Jeff does not have to reply for the umpteenthmillionth time "Then do a search for "bit plate" (with the quotes)"

..

[Woodman]

How's this sound: You're anticipating getting your first carvewright delivered. You go to sears to check out some odds & ends and end walking out with a $110.00 adjustable worktable. You then go to Lowe's and buy
a 4' X 2' piece of 1/2 inch plywood and spend the rest of the afternoon sanding it and waxing it after you've mounted it to the worktable. . . .

[Lin]

Woodman..I can relate...Been there...done that...last year while waiting for my machine to come in....lol
Lin

[Kenm810]

every time the machine stops you fine yourself holding your breath and praying,
that the LED display is reading.
CarveWright Main Menu
1) Project Menu

[oldjoe]

You call in sick to work because you have a flexshaft problem and you have to talk to a specialist at LHR.

[rue]

19.) When another carvewright owner talks about lubing his flexshaft, others smile and giggle while you nod knowingly with a stern face.

[luckettg]

every time the machine stops you fine yourself holding your breath and praying,
that the LED display is reading.
CarveWright Main Menu
1) Project Menu

Amen brother.

[DigitalDave]

In addition, you've learned to hold your breath for up to three hours.

[Cmdr.Rav]

Plus you go further in the poor house wanting and buying bigger CNC machines!


Rav

[fwharris]

When you look at any thing 12" to 18" away your head wants to move from left to right to left to right to left to right to left...