Senior Member
3/4" board might be too thin?
Never seen this one before during cut path bit check, it touch board then check the depth on the plate
then check the depth on the board (3/4"), stopped a gave the error message
"Board may be too thin 1.86/1.91, abort or cont.
I hit cont. to let it carve first, by the time it gets to the cutpath 2 1/2 hrs, I ill be watching very closely.
any ideas.
Perry B.
My Shop 1044
CarveWright START U Team Member
V - 1.187 and 3.0 too
With the DC Insert," dust all gone"
CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
www.customcarvingsbyperry.com
I have often wondered why it is that
Conservatives are called the "right" and Liberals are called the "left".
"The heart of the wise inclines to the right, but the heart of
the fool to the left."
Senior Member
I would say your board thickness calibration is slightly off. Watch closely, you may get thick tabs and/or it may not cut all the way through. I think it will adjust the cut depth according to the 1.86.
I would do a thickness calibration.
Senior Member
How is that done?
My Shop 1044
CarveWright START U Team Member
V - 1.187 and 3.0 too
With the DC Insert," dust all gone"
CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
www.customcarvingsbyperry.com
I have often wondered why it is that
Conservatives are called the "right" and Liberals are called the "left".
"The heart of the wise inclines to the right, but the heart of
the fool to the left."
Senior Member
Senior Member
Just finish my carve and had no problems, even though I said to continue to the error message, I went and recal. the depth as per you pdf.
see attached.
Thanks very much and have a Happy New year 2016
Perry B.
My Shop 1044
CarveWright START U Team Member
V - 1.187 and 3.0 too
With the DC Insert," dust all gone"
CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
www.customcarvingsbyperry.com
I have often wondered why it is that
Conservatives are called the "right" and Liberals are called the "left".
"The heart of the wise inclines to the right, but the heart of
the fool to the left."
Senior Member
What are you running windows 7 for the carving, why I ask I am having problem with windows 10 it will not programmed the cardOriginally Posted by myshop1044
Henry
Every one has a photographic memory. Some just don't have film.
Senior Member
No windows 7 or 10, wan't get near them.
My Shop 1044
CarveWright START U Team Member
V - 1.187 and 3.0 too
With the DC Insert," dust all gone"
CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
www.customcarvingsbyperry.com
I have often wondered why it is that
Conservatives are called the "right" and Liberals are called the "left".
"The heart of the wise inclines to the right, but the heart of
the fool to the left."
Senior Member
my bad, windows 7 home premium
My Shop 1044
CarveWright START U Team Member
V - 1.187 and 3.0 too
With the DC Insert," dust all gone"
CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
www.customcarvingsbyperry.com
I have often wondered why it is that
Conservatives are called the "right" and Liberals are called the "left".
"The heart of the wise inclines to the right, but the heart of
the fool to the left."
Senior Member
I thought so connie is saying most of us is on 10 I can't see that thx for the reply
Henry
Every one has a photographic memory. Some just don't have film.
Junior Member
Ok Perry, you have us all confused. What is it?
Posting Permissions
Reply With Quote