I need a little help with a pattern.
A friend of mine wants me to do a sign for her son in law
with one of these designs. Colorado School of Mines.
Any help would be greatly appreciated.
Thanks,
Hope
I need a little help with a pattern.
A friend of mine wants me to do a sign for her son in law
with one of these designs. Colorado School of Mines.
Any help would be greatly appreciated.
Thanks,
Hope
Mine Logo.mpcThree side.mpc
I hope this will work. Let me know if you need more.
Leo Davenport
Enjoy Life Carve Something everyday
Thanks, Leo
Sorry late getting back but I have been busy, like everyone at this time of year. Trying to finish up gifts.
I have attached my sample pattern is there any way to set it to use a 90 degree bit to cut like centerline
Just wondering if it could be done, to try and clean it up a little.
Thanks Hope
Here is an attempt using Vector Groups. All will be cut with the 90V bit. mpc is Designer 3
Thanks for all of your help!!!
Will try to carve it shortly !!!!
You might want to tweak the size of the text. Take a close look at it all. You can move things around.
It carved great but I am wanting to carve it on a board that is 14 x 15 and can't seem to get the board settings and the design in
the center of board. HELP!!!