CW not reading card

[fwharris]

Do not feel to bad, you are not the first and for sure not the last! Adding on to another persons issue that you are also having does keep things in the same spot.

For starting your own blog, from the main page of the forum you will see the "blog" section at the top. One thing that I have noticed on the blog section is that it does not seem to get the attention like the normal posts do in the forum section. I've seen a few blogs that have not received any responses.

[fwharris]

I hope this link works... it is to the Blog Page

http://forum.carvewright.com/blog.php

on the right is a link to create a new post.

I haven't done one, but I think in the forum you can post that you added to your blog. Create a 2A "Blog" post in troubleshooting, and update the post when you update your Blog.

Great Idea!

[2A Finishing]

Something tells me it'd make more sense to simply make a "2A Troubleshooting Log" post in the troubleshooting section instead of making a blog AND a post...

I appreciate the tips guys, feel free to remove the extraneous posts if need be!

Just for S&G's, here's a few semi-successful carves I've done in between memory card issues - they all have a few flaws, but I'm getting a little better as I work with the software and machine more.