This is package deal
The Carvewright's current condition, the head won't crank down. It will go up but gets stuck going down.
And its a little dusty from not having a vac hookup. Other then that it was working fine the last time I used it.
Cut Moter= 131 hrs 23 min
Servo time= 151hrs 37 min
Scanning time= 15hrs 20 min
Comes with; upgraded belt (it was never installed, still in the box that it came in)
1/16 carving bit (used)
1/8 cutting bit (rarely used)
3/16 carving bit (never used)
card and card reader
Carving material; Corian (color vanilla, enough to make over 100 8x10's)
Qrt sawn Cherry MDF (good for signs and plaques)
Wood blanks (Walnut and Maple)
Other material (NOT FOR CARVING); 3Form (Bear Grass) Good for things like bird feeders,or projects that you would put
a light behind. This is a fish tank stand (Not Included) I'm working on using puck lights behind the 3form.
This is package deal, $1,000.00 for all. I do have the box it came in but I prefer a local pickup.