Results 1 to 4 of 4

Thread: gavel and base ptn

  1. #1
    Join Date
    Jan 2008
    Location
    New Iberia, la.
    Posts
    1,866

    Default gavel and base ptn

    attached is a picture of the business card sent to me. maybe a ptn of the picture would be great or a separate gavel
    and base might work too. I have a good gavel ptn but not a good base. any help would be great.
    Attached Thumbnails Attached Thumbnails gavel.jpg  
    My Shop 1044

    CarveWright START U Team Member

    V - 1.187 and 3.0 too
    With the DC Insert," dust all gone"
    CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
    CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
    www.customcarvingsbyperry.com
    I have often wondered why it is that
    Conservatives are called the "right" and Liberals are called the "left".
    "The heart of the wise inclines to the right, but the heart of
    the fool to the left."

  2. #2
    Join Date
    Apr 2014
    Location
    Texas
    Posts
    2,885

    Default

    Quick and dirty attempt at a pattern. One done with a bas relief and another using .stl method so different geometries.

    Edit: 12 hours later and looking at my patterns they are really flat. I'll play with them again after work to see if I can get it a little better.
    Attached Thumbnails Attached Thumbnails gavel examples.jpg  
    Attached Files Attached Files

  3. #3
    Join Date
    Apr 2014
    Location
    Texas
    Posts
    2,885

    Default

    I have my glass of tonic water with a splash of vodka and plugging away. Hopefully this one is closer to what you need. Re-did the mesh and was able to get a little bit more height in the pattern. Let me know if it needs to be tweaked some since I have the 3d model done its easy to build patterns from it.
    Attached Thumbnails Attached Thumbnails gavel version 2.jpg   gavel version2_1.jpg  
    Attached Files Attached Files

  4. #4
    Join Date
    Jan 2008
    Location
    New Iberia, la.
    Posts
    1,866

    Default

    Thank you oscarl48 for you efforts.
    My Shop 1044

    CarveWright START U Team Member

    V - 1.187 and 3.0 too
    With the DC Insert," dust all gone"
    CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
    CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
    www.customcarvingsbyperry.com
    I have often wondered why it is that
    Conservatives are called the "right" and Liberals are called the "left".
    "The heart of the wise inclines to the right, but the heart of
    the fool to the left."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •