attached is a picture of the business card sent to me. maybe a ptn of the picture would be great or a separate gavel
and base might work too. I have a good gavel ptn but not a good base. any help would be great.
attached is a picture of the business card sent to me. maybe a ptn of the picture would be great or a separate gavel
and base might work too. I have a good gavel ptn but not a good base. any help would be great.
My Shop 1044
CarveWright START U Team Member
V - 1.187 and 3.0 too
With the DC Insert," dust all gone"
CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
www.customcarvingsbyperry.com
I have often wondered why it is that
Conservatives are called the "right" and Liberals are called the "left".
"The heart of the wise inclines to the right, but the heart of
the fool to the left."
Quick and dirty attempt at a pattern. One done with a bas relief and another using .stl method so different geometries.
Edit: 12 hours later and looking at my patterns they are really flat. I'll play with them again after work to see if I can get it a little better.
I have my glass of tonic water with a splash of vodka and plugging away. Hopefully this one is closer to what you need. Re-did the mesh and was able to get a little bit more height in the pattern. Let me know if it needs to be tweaked some since I have the 3d model done its easy to build patterns from it.
Thank you oscarl48 for you efforts.
My Shop 1044
CarveWright START U Team Member
V - 1.187 and 3.0 too
With the DC Insert," dust all gone"
CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
www.customcarvingsbyperry.com
I have often wondered why it is that
Conservatives are called the "right" and Liberals are called the "left".
"The heart of the wise inclines to the right, but the heart of
the fool to the left."