I am trying to carve text and the letters keep chipping out. Any help would be great.
Font Ariel Black Bold
Spacing 10
Depth.200
Height 999
Size 3.5' x 1"
Bit Opt. Best
Feather 1/8
Draft Small
Thank you
I am trying to carve text and the letters keep chipping out. Any help would be great.
Font Ariel Black Bold
Spacing 10
Depth.200
Height 999
Size 3.5' x 1"
Bit Opt. Best
Feather 1/8
Draft Small
Thank you
What carve quality did you use for the upload to the card? I would suggest maybe lowering the height. Looks like pine which is prone to chip out. Set draft to medium.
RingNeckBlues
My patterns on the Depot
DC-INSERT It Just Sucks!
Proven to out perform all others!
Buy CarveWright
Colorado FaceBook Users Group
All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.
Thank you for responding I used Best quality to upload. Wood is poplar. what should I lower the heigth to?
I would maybe try 500 on the height and see if a medium draft would help.
RingNeckBlues
My patterns on the Depot
DC-INSERT It Just Sucks!
Proven to out perform all others!
Buy CarveWright
Colorado FaceBook Users Group
All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.
Thank you very much I will try that
Dull bit?
AL
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
I would say shorten the height to under 500.