Results 1 to 3 of 3

Thread: New 1/32" Carving Bit

  1. #1
    Join Date
    Dec 2011
    Location
    Shreveport, Louisiana
    Posts
    386

    Default New 1/32" Carving Bit

    Has anyone purchased this new bit and done carving. I'm interested in knowing how the quality of the carving and what materials you have tried.
    In addition has anyone tried using this bit to obtain smaller carving that couldn't be achieved with the previous bits.

    Thanks
    John

  2. #2
    Join Date
    Nov 2008
    Location
    Vancouver Island
    Posts
    8,193

    Default

    I think that if you put a finely detailed pattern on a board in Designer you will be able to see the difference when you change the pattern bit back and forth between the 1/32 and the 1/16. (Remember to use bit optimization best.) That is what I did. I have not given it a real try yet.

  3. #3
    Join Date
    Dec 2011
    Location
    Shreveport, Louisiana
    Posts
    386

    Default

    Thanks for the information, I'll try that.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •