Hi Guys,
Seems like the best practice with problems is to upload photos and the file. So if I did this incorrectly, I apologize in advance. I still have newbie-itezs. I am building a cradle for the soon to be arriving grand daughter.
I have mocked it all up in pine, albeit a smaller size in some cases and larger in others. This allowed me to tweak it to where I wanted to. Great machine to do this with by the way.
I was so pleased with the result, I went a little out side of my comfort zone. I added both pieces together into one pattern or plan and cut it as one. I also took the carving level up to best bit optimization. At first it seemed to be working great. But some how the names got misaligned with the tree and the cuts were off maybe half an inch. I used a 40 inch board that was 10.5 inches in width. I told the rollers no and not cut to size or any other adjustments. If you get a moment and look at the result and the mpc, maybe you can give me an idea of what I did wrong. It might have been a one-off act of nature, I don't know. I had just completed a pine one with the tree moments before. Tomorrow is another day and I will give it a try doing each one individually I saved the files.
Thank you in advance.