I know that you can intentionally relock the machine (requiring the code be put in again) by pulling the memory card out and THEN turning off the machine. Don't ask me how I know this...
200k
I know that you can intentionally relock the machine (requiring the code be put in again) by pulling the memory card out and THEN turning off the machine. Don't ask me how I know this...
200k
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
Ummm, might fry something. Don't do it...
CarveWright CX Packaged System - starting at $2000
CarversClub 1 Year Subscription - $150.00/year
Adv. Support w/out CC membership - $25.00/issue
CarveWright Community Forum - PRICELESS!
I would ask someone asking for a unlock code if they pulled the card with the power on? Could be the source of the problem and yes, I would not recommend pulling the card with the power on.... Like pulling you computer microprocessor or RAM while the computer is running.... not a good idea...
AL
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
Hi Al
I have had this same problem with my C machine several times and it now happens every time the machine is shut off, which I do after useing at all times. The last 4 times I have shut it off it has asked for the code on start up. I work in the IT field and would never pull or plugin a card when it is powered on.
Have a great day.
Be the change you want to see in the world!
Richard
Calgary, Alberta, Canada
Pulling/plugging in the card has nothing to do with the unlock code request. It has to do with memory internal to the controller. I take it you can still use the same unlock code?