Results 1 to 3 of 3

Thread: Blast gates

  1. #1
    Join Date
    Aug 2007
    Location
    North Carolina
    Posts
    1,367

    Default Blast gates

    Currently I am pulling two 4in hoses on my 1hp grizzly. No complaints on power, however the plastic harbor freight blast gates tend to get dust wedged up into the small circular slots not allowing them to close. Quite a pain. I need to get new ones and would rather shell out money for good ones vice cracking more plastic ones. Does anyone have any advice on what brand or who to buy from. Thanks in advance.

    Sent from my ADR6300 using Tapatalk 2
    Custom Stadium Coin Racks for displaying Military Challenge Coins, GeoCoins and the like- http://www.etsy.com/shop/stadiumdisplays
    OR http://shop.ebay.com/stadiumdisplays...&_trksid=p4340

  2. #2
    Join Date
    Apr 2009
    Location
    Enumclaw, Wash
    Posts
    146

    Default

    I have the plastic one also and had the same problem. So I went to cast aluminum for harbor freight and had no problems with them yet.

  3. #3
    Join Date
    Aug 2007
    Location
    North Carolina
    Posts
    1,367

    Default

    Upon doing a little research I have found the self cleaning ones that are open on both ends. I shall order those.

    Sent from my ADR6300 using Tapatalk 2
    Custom Stadium Coin Racks for displaying Military Challenge Coins, GeoCoins and the like- http://www.etsy.com/shop/stadiumdisplays
    OR http://shop.ebay.com/stadiumdisplays...&_trksid=p4340

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •