How do I find out if the Controller Board Enclosure Assembly is bad? I get black sq.s in my screen. I did the step by step , as I was told. The last thing it said is this was bad. But want to be sure.
Before I buy one.
Thanks
Jack
How do I find out if the Controller Board Enclosure Assembly is bad? I get black sq.s in my screen. I did the step by step , as I was told. The last thing it said is this was bad. But want to be sure.
Before I buy one.
Thanks
Jack
Jack of all trades ,master of none, but if you got a job, I'll git-er-done.
http://theswamper.tripod.com/
The Black Squares on the LCD Screen have been in the past a indication that the Memory Card was not installed. A inspection of the Male Pins of the computer to look for any bent pins. The Pins are Exposed. A Wood Chip may have jammed in the pins preventing the Memory Card from Fully Seating.
That is step 1... 2 is reformat the card OR try a 2nd card.
3 Could be the Computer... Cheapest Option is to send the Power Supply, Keypad and Computer to LHR for testing. OR find a buddy to swap parts.
Good Luck,
AL
WAG of the Night... Wild AL Guess... Check the Contrast Adjustment on the LCD......
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
Thanks, I 'll try that.
Jack
Jack of all trades ,master of none, but if you got a job, I'll git-er-done.
http://theswamper.tripod.com/