thought I would try a spoon with a fancy handle.
patterns can be found on my web site on page 5 of the patterns, click link below.
thought I would try a spoon with a fancy handle.
patterns can be found on my web site on page 5 of the patterns, click link below.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
What an awesome project-- I can't wait to try it out. Thanks for sharing it--
Lawrence
Lawrence, remember to add some tabs if you do a two sided carve.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Eddie
Very nice design. I look today in your page and is very nice. Congratulation and thanks for sharing with us.
Hilda
Added a fork to the site now.
Link below for patterns on page 5
Last edited by eelamb; 02-15-2011 at 04:30 PM.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
At it again, this time I have made the spoon (scoop part) and the handle as separate patterns. This allows you to make a spoon with your own design or one of the handles I have made. Making the handles takes about 2 minutes. Takes longer to make the images saving as stl, and slicing, then making an image for my site and uploading.
Anyhow as you can see the scoop part of the spoon needs some work, and I will fix it. Later tonight I will have the spoon (2), fork(1), and 2 handles uploaded to my site. handles will be one pattern for each since both sides are the same.
edit: image is top section joined making the bottom section in designer.
OK patterns are on my site now.
Last edited by eelamb; 02-16-2011 at 08:40 PM.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Looking good.
H. T.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Friends Don't Let Friends Use bad patterns!
For high quality patterns please email me or check out my website at: http://carvenow.com . Thanks!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *