Hi,
this corner block is 4 x 4.
Is one of you guys can help me to design the carving please ?
Or maybe your have a similar pattern for sale ??
See attached JPG pictures
Thanks a lot
Hi,
this corner block is 4 x 4.
Is one of you guys can help me to design the carving please ?
Or maybe your have a similar pattern for sale ??
See attached JPG pictures
Thanks a lot
Francois
Beautiful Laurentians, Québec, Canada
Designer V1.161
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29
Kind of hard to tell from your Photos,
But maybe something like this?
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
Hi, I have one in my store. Here is the link: http://www.go3d.us/store/product_inf...9297cd76386d27
Thanks
HT
That is a standard rosette, the tool for making them are available at woodcraft, it fits in a drill press. But Ken has made a couple that will be very close to the pattern you want.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
if you want to have fun and make a lot more diff kinds go to this post and scroll down to my post with the zip file in it. http://forum.carvewright.com/showthr...light=gradient it has the wolfies gradient designer and will make the pattern for you.