Good morning
Made one of my own, Will try to post some pics
Michael
Good morning
Made one of my own, Will try to post some pics
Michael
We should be too big to take offense and too noble to give it .
Michael
WA8MCI
Running
But i think haveing two bad qcs has messed up the lower bearing,
That should be fun !
We should be too big to take offense and too noble to give it .
Michael
WA8MCI
Stan, internal threads can always be put in using a tap on a lathe, but be sure to use the tailstock center to make sure the tap is straight with the body of your chuck, this should be done by hand and not with power feeding. You can get taps for any size of threads, standard or MM.