Cool. I will hang on to that cutout, it may come in handy. My brother liked the paddles that I made for him so much, he wasn't sure he wanted to use them! I may have to make a simpler one that he will use!
Just an Experimental Concept
Like in the posted Tip A few months ago --- Adding one of the CW Designer Textures to a Dome or "Dish"
Last edited by Kenm810; 04-13-2012 at 02:08 PM.
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
Here's a few things that I've been working on.
I like the traditional picture frames with mitered corners, but I also wanted to personalize a frame with the CarveWright. So I built a somewhat traditional rectangular frame using mini biscuits,
then loaded it into a sled and carved it much like a solid board. I used the Tips and Tricks Issue 17 for guidance. Building to precise dimensions pays off with this technique. The first frame turned out so well, I ended up making three, one for each of us.
(I pixelated our faces in case we have to take it on the lam someday.)
I haven't done any for a while, so I thought I'd try something a little Nautical
Last edited by Kenm810; 04-13-2012 at 02:09 PM.
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
Very Nice! Did you draw the ship? I like it.
Bill....
Ken,
Great design and it's going into my nautical charts room. Thanks for sharing this.
Fair winds,
Capt Bruce
Kinney deSigns http://kinneydesigns.us
CarveWright START U Team Member.
30 year USN SEABEE, the original Weapons of Mass Construction.
Designer Ver 1.187 and 2.007, Ver.3.001 One 2009 B CW w ROCK and a 5th Year Anniversary C CW
Rotary Jig, 2D and 3D, Tracing Probe, DFX and STL Importers
.
Very beautifull . As always
Hilda
Thanks Folks,
I found the Ship picture on the Web then added a couple of other
Nautical elements to it, -- played around a bit combining them to make the Ptn Pattern.
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails