O Ring

[corsair1961]

Board Sensor is giving me problems. After reading the forum I see everyone is talking about checking the "O" Ring. Looking at my sensor I don't see one and really don't remember ever seeing one. Can someone tell me or better yet show me where it is located on the Sensor.

Thanks
Corsair's wife ( I am not going to give up my machine yet!!!!)

[Kenm810]

Here it is, on the Board Tracking Sensor Between the Traction Belts

The Board Sensor (photos 2&3) is on the bottom of the carving head behind the "Z" truck, you need a mirror to see it.

You can more info doing a forum Search for "Board Sensor" or "Tracking Sensor"

[corsair1961]

Ken
Thank you so much. We are missing the O Ring. Interesting but we dont remember it being there before. Do I have to order one from support or can I just pick one up at our local hardware store.

By the way what exactly does the O Ring do?

Thanks again.
Claudia

[hess]

Ken
Thank you so much. We are missing the O Ring. Interesting but we dont remember it being there before. Do I have to order one from support or can I just pick one up at our local hardware store.

By the way what exactly does the O Ring do?

Thanks again.
Claudia

Claudia
look close on the brass wheel I have been replacing o rings like crazy only to find the old one had pushed back on the roller under the black metal took a pick and pulled it back out and no more problem

[Digitalwoodshop]

If you slide the board into the left side sometimes the O ring catches on the sharp wood and pushes back.

AL

[cnsranch]

Look in the thread below - I got a pack at Home Depot.


http://forum.carvewright.com/showthr...ghlight=o-ring

[Steven Alford]

Look in the thread below - I got a pack at Home Depot.


http://forum.carvewright.com/showthr...ghlight=o-ring

Sorry Jerry, this link goes nowhere. Can you fix??

[cnsranch]

Hmmm....

Here are the specs:

7/16" O.D x 5/16" I.D.

Inside and outside diameters are the important numbers to use.

[Kenm810]

Maybe this was the Thread

http://forum.carvewright.com/showthr...ghlight=o+ring