Former owner needs a project run

[Kurtsara]

I sold my Carvewright awhile back but I need a couple projects ran, actually one project ran two times

21"X3.125" clear pine, I need the project done in CENTERLINE though

This is what I made when our daughter had our first grand daughter, now she had our first grand son.

Can anyone give me a price, maybe someone in Minnesota?

[Digitalwoodshop]

Kurt,

Do you still have older versions of Designer on your computer, 1.134?

I can not open it with 1.134 and I have a bunch of projects in the works and don't want to upgrade yet.

I still owe you from when you converted some files to Centerline way back in year 1 for me. Before Centerline came out to the public.

If you can get it to me in 1.134 I would be glad to do it for you. FREE.... I have the clear pine here.

AL

[Kurtsara]

Kurt,

Do you still have older versions of Designer on your computer, 1.134?

I can not open it with 1.134 and I have a bunch of projects in the works and don't want to upgrade yet.

I still owe you from when you converted some files to Centerline way back in year 1 for me. Before Centerline came out to the public.

If you can get it to me in 1.134 I would be glad to do it for you. FREE.... I have the clear pine here.

AL

Al,

No, I actually had to download the demo program to make the mpc I posted, I didn't think it would run since I had the demo run already on this computer.

Maybe someone could convert it to 1.134 and repost it.

[HighTechOkie]

Since it is just simple centerline text, just PM Al with the words, height and font used. It will only take 30 sec to redo (okay, maybe it will take Al a bit longer ).

Rob

[FINGERS]

I'm in Wisconsin If you need it now.

[Ike]

Kurt,

Do you still have older versions of Designer on your computer, 1.134?

I can not open it with 1.134 and I have a bunch of projects in the works and don't want to upgrade yet.

I still owe you from when you converted some files to Centerline way back in year 1 for me. Before Centerline came out to the public.

If you can get it to me in 1.134 I would be glad to do it for you. FREE.... I have the clear pine here.

AL

Al if it helps the font is Mistral and I took a screen shot of the mpc. so if you have the font type you can re-design the project. Plus it is set in outline bold cut and as you see raised lettering.

The board setting is 3.125" wide and 21" long 3/4" thick. XAVIER NOBLE size is 8" X 0.813. 4" from the left edge and 0.375 from top 20 OZ size is 3.875 X 0.813 4" from the right edge 0.375 from top. All set at 0 spacing and depth at 0.063.

7-23-09 spacing 4 clicks with space bar between 1:42 p.m. 7-23-09 4" from left edge and 3.75" away from middle and bottom. 7 lbs. 12 oz. 4" from right edge. Also 3.75 setting. The 4" on each ends are from the first letter X Xavier left. For the right 4" E of Noble.

Bottom the 4" left edge begins with 2 20 oz and right the Z of the 12 oz.

Hope I made sense to you and it helps!

Ike

[Kurtsara]

If anyone can convert this to 1.134 and send to Al I would appreciate it.

I made the board 21" long because when I had mine if I remember correctly we had to have the board 3.5 inches longer on each end.

Kurt

[Ike]

About the only way to convert it is to re-designed in 1.134 since you designed it in the latest version. Since Al is using 1.134 it would be best for him to enter the info. I was just trying to help him do that.

I may be wrong, but I don't think it can be converted from the latest version to 1.134 without starting over?

Ike

[Digitalwoodshop]

With Ike's info it should be easy to make up a mpc. I am only in the shop tonight for a short time and will be out tomorrow on the road.

I will get back to you soon. Look forward to doing it.

Thanks,

AL

[Ike]

Al, I think he has allowed for rollers I did not know this from the design. He did say it was 21" to allow for 3 1/2" on each end.

Hope all the info is clear, I know how busy you are and I was not doing anything yesterday so I thought I would help!

Ike