Just recieved my rock chuck today. Thanks Ron.
Type: Posts; User: Rickrljones; Keyword(s):
Just recieved my rock chuck today. Thanks Ron.
Thanks to everyone who replied to my question on the removal of the QC. I appreciate the links to help with the removal and installation of the rock chuck.
I just order the Rock Chuck from Rjustice, and just in time too. The QC on my carver just disintegrated yesterday. I have one quick question for those who have installed the RC. Are the threads on...
Here is a 3D dollar sign you may be able to use.
Hello Eric,
To avoid cutting into your sled I have attached a piece of 1/4 material to the 3/4 board with double-sided tape. Told the machine the wood thickness was 1" and the results was...
I like the effects you added to the project. This pattern was about the first I scanned when I got my probe. Glad to see someone using it. Keep up the good work.
From the main menu scroll down to the bottom of the page and click on "Marked Forums Read".
After reviewing your pictures of projects you've completed, I have to say this is one the best displays I have seen so far on this board. Excellent Work!!! I can see where you will have to relocate...
For those who are thinking about installing Windows 7 Beta release take caution. I believe that the beta version expired in August 2009. I would hate to see you install this operating system to find...
Thanks for sharing this pattern with board. Should carve nicely.
Your local Home Depot has Gunk chain lube with Moly.
I can not view the project you posted. All I see are X's in a box.
Where are the photos of this project? Have they been deleted from the board or am I losing my mind?
Hello Ray
Totally Awsome!!! The Cabin scene is one of the most impressive projects I have seen on the thread. Great craftsmanship and finishing.
Here is a ZIP file with all 50 states included. Hope this is what your looking for.
Thanks for sharing this pattern with the thread.
I have performed this procedure by doing the following.
1.Take the piece of wood you want to carve, lets say its 1/4" stock, now hot glue (spot glue) a piece of 1/4" wood, paneling, or MDF to the...
If the problem is in the registry, try using a program from PC Tools called Registry Mechanic. When I used this registered program on the computer at home here, it found around 900 errors in my...
I also run Norton Ghost, Try searching under the following directories.
C:\Documents and Settings\Your Name\Carvewright Designer stores the file yor looking for in this directory. Hope this helps!!!
You can sand it off with 320 grit paper. Will not affect the finish.
If you prefer not to use the suggestion presented by Chris, an alternative solution would be to carve your design on a 1" x 12" stock and glue filler blocks on each side to achieve your over all...
Sled with rails pertains to using a scanning proble, this allows for the project to stay under the roller. Using a sled to carve, has to be at the thickness so CC/CW can determind the board...
Hello Amanda,
I received the same scenario when I did my last carving on corian. Mine were not as protrusive as yours, but having the same problem. Made sure the material was not cupped and carved...
I'm sure the police department will display your plaque with pride. Great work!!! Did you use a router to finish the edges? Nice to see quality work.. Thanks for sharing.
I ran across this problem as well, I tried taping the edges on the corian but still did not work. To correct the issue of load board was used two sided tape and attached the material to a 3/4" board...