Search:

I pulled the motor off the machine and inserted the flex cable into it. Seemed to go in one more click deeper. Pulling the motor gave me a better leverage. I think that the cable was simply not...

The cable depth on my spare machine is the same as this one as far as the depth of the chuck end. The motor end stops solidly as well. Cannot push cable into motor past a certain point. Used old...

I had a y axis stall error during a carve. I reset everything then noticed the cut motor running but bit not spinning. I just replaced flex cable a few weeks ago. When I pulled the flex cable out of...

All fixed up. The belt did show signs of wear. You will need a 12mm thin wrench to get behind the z rollers. I got mine on amazon. Loosen the z motor pack then loosen rollers with 12mm wrench and the...

I thought I replied to you already. Any rate the z box is all new. 8 hours on it. I got new belt on and found the clamp that holds belt slipping. Pretty smooth now. Going to give it a whirl. Thanks.

I can pull Z belt through belt clamp. I guess that was the clicking noise.

Hello,
I recently replaced my z motor pack after having many stall errors. Now after only one easy carve it no longer homes in the z axis. I have the belt as tight as I can get it but I can see it...

Interesting Idea. I wonder if they make router bits long enough to go through a 2x6 and still have room for bearing. Thanks for the reply.

Hello, I am trying to cut letters out of a 2x6. I figured out the software end and had limited success making a few. Now I am just trying to do a basic V letter. It starts the first pass fine but the...

Hello, I had the E06-0324 z axis error tonight. The axis never even tried to move when trying to start project. The Z could move freely powered on or off. Also zero reading on the board sensor. I saw...

Hello, Does anyone have a spare 14 wire FFC cable i can get? I ordered over a month ago but they are out of stock with no resupply date in site. I can ship it to you when back in stock or straight up...

How did you get pics of my motor? Lol.

Post mortem update. Motor is in fact packed with saw dust. The dust outlet was clear. It was caked in between the windings of the field coil. and it was packed firmly between the field coil in the...

Found it. Looks like a $40 refund for the core too. That is nice. http://store.carvewright.com/product.php?productid=21488&cat=384&page=1

Open field coil. Some melting in field coil housing. I do not see cut motor assembly in parts section. Going to look again. I guess i solved my own problem but it is here for the record.

Ok I do not have continuity at the black and white wires, it is open. Popped the brush caps off and I do have 3.0 ish ohms across the brush holders. I am going to crack the case open and see if a...

Hi it is me again. I got the 1/16 deep carve bit and purchased the double sided sea horse from the pat depo. I tried it in 1 1/2 pine with pierced selected. I selected best thinking that would take...

No. I stop and blow it out sometimes. It came with a dust collector but i have not put it on yet. I have to cut the cover and I want to make sure i am going to keep machine before I do any mods. It...

Th next carve did the exact same thing in the exact same spot. I will delete the pattern from the card and re-upload it. I am guessing it may have become corrupt somehow. Did all the roller sensor...

Well i did abort it. Sort off. I raised the rollers up and THEN it gave the "check roller" error. I think the board may have been warped so bad it jammed?? IDK. Working fin now. Sucks to lose all...

My machine is 6 hours into a basic shape cut out but has now stopped moving at 74%. The bit is spinning just not carving. Stopped carving barely touching surface. I stopped it blew it really good and...

Yes the chuck was normal to see through. I ended up putting the old sleeve on the new cable and packing a bit of tin foil into the motor end to get the shaft to come out a little bit. I has been...

The bit holder end has no stop. With the bit out I see straight through. So the drive cable just works into the bit holder until it disconnects from motor and stops spinning. Rigging something now.

I pulled the motor and put cable in there. It goes in a bit and stops. The cable spins the motor ok with minimum play. I'm going to say it is ok. i will have to wait to try it all again due to the...

I was thinking about that. I will check it out. Thanks.