..You finally learned how to "search" so Jeff does not have to reply for the umpteenthmillionth time "Then do a search for "bit plate" (with the quotes)"
..
Printable View
..You finally learned how to "search" so Jeff does not have to reply for the umpteenthmillionth time "Then do a search for "bit plate" (with the quotes)"
..
How's this sound: You're anticipating getting your first carvewright delivered. You go to sears to check out some odds & ends and end walking out with a $110.00 adjustable worktable. You then go to Lowe's and buy
a 4' X 2' piece of 1/2 inch plywood and spend the rest of the afternoon sanding it and waxing it after you've mounted it to the worktable. . . .
Woodman..I can relate...Been there...done that...last year while waiting for my machine to come in....lol
Lin
every time the machine stops you fine yourself holding your breath and praying,
that the LED display is reading.
CarveWright Main Menu
1) Project Menu
You call in sick to work because you have a flexshaft problem and you have to talk to a specialist at LHR. ;)
19.) When another carvewright owner talks about lubing his flexshaft, others smile and giggle while you nod knowingly with a stern face.
In addition, you've learned to hold your breath for up to three hours.
Plus you go further in the poor house wanting and buying bigger CNC machines!
Rav
When you look at any thing 12" to 18" away your head wants to move from left to right to left to right to left to right to left...