Want To Buy A New Machine???

[MichaelB]

The Sears Outlet site says they have one ***NEW*** for $599.93. It's only a 2 hour drive from me.

Looks like I'm taking a short roadtrip tonight!

[Hesstx]

Originally Posted by MichaelB

The Sears Outlet site says they have one ***NEW*** for $599.93. It's only a 2 hour drive from me.

Looks like I'm taking a short roadtrip tonight!

if you have not done so already go to the sear ssite and sign up for the craftsman club no fee and they will have to knock off over 110.00
Make sure you get an extended warranty

Take a card with you if you have one to make sure it all come up online

if the bits are not there tell them you want them


Well worth the drive hope it work well for you

[rjustice]

Originally Posted by Ike

Ok this is what I do 1st go to www.sears.com once there at the top right you will see "Outlet" tab. Push tab then you are in the the outlet. Then in the box what are you looking for type in Compucarve. Then it takes you to the page with all the accessories etc. Go to the refurbished CC and click more info. In select stores put in your zip and when it comes out with nothing click on nearest store.

If that doesn't work go to the map and with hand cursor move from state to state and it will show the Sears store with a big S and then it will show the stores check them and nothing deselected and try another store/ state until it shows a store with a refurb CC.

That is what I do so that is all I know!

Ike


Ok one other thing using that same hand cursor and using the + - function zoom in on a state and it will show the stores do nothing and click on the search and then it will ask if want to see the nearest store to you. So far best price is in PA for $899.00 or you can buy them for $999.00 anytime by just going to Sears and checking for a CC

I had to see what i could get one for in my area. I would love to have another machine to work with... (new 999.93 and reconditioned 899.93) Also, Hess do you know how they determine how much they give you off with the Craftsman club discount?

Has anyone noticed that the section that this comes up under is the "Discontinued" products? Is sears discontinuing the distribution?

Thanks,

Ron

[Hesstx]

Originally Posted by rjustice

I had to see what i could get one for in my area. I would love to have another machine to work with... (new 999.93 and reconditioned 899.93) Also, Hess do you know how they determine how much they give you off with the Craftsman club discount?

Has anyone noticed that the section that this comes up under is the "Discontinued" products? Is sears discontinuing the distribution?

Thanks,

Ron

not sure I know that 600 gave me back 110 but I did by a 290 warranted so it that was added in around 10% maybe

They still list the new one but I do wonder if they are getting out

I will say this I have seen lots of stuff neg here about Sear and the warrenty My unit went in tues and was a total that had to be stripped to the base I got a call tonight tellinh me it is done and I get it back in the AM so that not bad hope they tested it well

new for less than 1k I would by new and just make sure you get the 5years

Wonder what happens if they DC and then can repair your unit and dont have a replacement

[Ike]

Figured out how to defined your search, use the price filter and then it will show 2 different CC. I found CC ,listed new from $399.00 to $899.93 refurbished

Ike

[Hesstx]

Originally Posted by Ike

Figured out how to defined your search, use the price filter and then it will show 2 different CC. I found CC ,listed new from $399.00 to $899.93 refurbished

Ike

Ike were did you find the 399.00 one i could use a part uinit

[chkorte]

I found that $399 unit to. It was at a store in Kentucky. I called and asked about it. The salesman said it was a floor model display, was not in good shape and had no additional accessories with it. I hadn't bought a machine yet so I passed. Good luck

[Ike]

Originally Posted by Hesstx

Ike were did you find the 399.00 one i could use a part uinit

Hess, here is the info

FLORENCE - Sears Retail Store view on map

Store # 1730

Address: 3000 Mall Rd Florence, KY 41042-1494

Phone: 8595254589

Can’t print?
Write down the information below, and bring it with you to make your purchase. Mention you saw it on-line to get your discount! Store # 1730
Item: 009 21754 991 0763
Sale Price: $399.93
Tracking No:1730-110709-8853


To get to a list of all the CC go to the outlet, sign in then search for the CC. Once at the page you will see price filters on the bottom left. Check the $47-$921 box. Then just put in your zip and then check one store and save and close. It should take you to the page it will show you all the stores. Click it and the list should come up with all the stores all over the US.

Ike

[Hesstx]

well went to get mine they did not do anything to it just totaled it and it not for a great manager I would have been fu&Ked . The Salesmen was upset and said you bought it as is I says why would you sell me an extended warr if it was not going to pay the manager stepped in and as a result I am getting a brand new unit that should be here wed. Look's like Sears is only going to handle these online
so finding them in the store is going to get hard. They have 4 broke units that I made them an offer on he is to let me know next week

Another thing the manager stated was that i bought a Demo they come with the same warranty as new 1 year LHR and what ever you add. the Salesman says to the manager you cant give him a new machine for a non working one! the manger says we knew it was damaged didn't we? We still sold him it and extended warranty right?

Buy the warranty at lest it binds them to if a little closer

[Ike]

Originally Posted by Hesstx

well went to get mine they did not do anything to it just totaled it and it not for a great manager I would have been fu&Ked . The Salesmen was upset and said you bought it as is I says why would you sell me an extended warr if it was not going to pay the manager stepped in and as a result I am getting a brand new unit that should be here wed. Look's like Sears is only going to handle these online
so finding them in the store is going to get hard. They have 4 broke units that I made them an offer on he is to let me know next week

Another thing the manager stated was that i bought a Demo they come with the same warranty as new 1 year LHR and what ever you add. the Salesman says to the manager you cant give him a new machine for a non working one! the manger says we knew it was damaged didn't we? We still sold him it and extended warranty right?

Buy the warranty at lest it binds them to if a little closer

Fantastic! Good for you!! Not bad a brand new machine for less then $400.00 plus a 5 year warranty to boot! The manager was smart, the salesman must be the same one I talked to over the phone? He speaks very broken english sounded like he was from India by his accent.

I read that reconditioned machines come with the factory warranty I need to call LHR and find out? Mine was new and never was used so I was happy! But I am jealous you are the smartest!

Ike